|
|
Build Your Online Product Catalogs?
The Model is OBD+GPS dual system. Please switch to GPS system when OBD mode is not available.
OBD2 mode working voltage: 5V~18VDC (12vdc/200mA)
System selection
Please short press ¡®<¡¯ button to switch the mode OBD or GPS when the OBD icon flashes, it will automatically enter the last selected system after 5 seconds of inactivity.
OBD System (For OBD2 car)
Functions:Vehicle speed,engine RPM,fuel consumption,water temperature,voltage,clock,dashboard,
travel time,travel distance,altitude,number of co***ss satellites, RPM icon
GPS System (For all car)
Functions:Vehicle speed,time,voltage,travel time,travel distance,travel direction,altitude,satellites number,speed Icon
When the OBD system is not co***tible,please switch to the GPS system and plug with the USB cable
GPS system use
GPS flashing is in the state of searching for stars. Please move the car to an open road. After the satellite is finding,the GPS light stops flashing and stays on for normal use.
Restore setting:
Unplug the power,long press the ¡®M¡¯ key and don¡¯t release it, plug in the power and release the ¡®M¡¯ key after the screen is fully lit.
Clear the fault codes
1.Powering on the connection agreement,
2.Long press the ¡®<¡¯ key and the HUD screen will light up and clear the fault code,
3.Long press the ¡®<¡¯ key again to exit.
Turn off/on the buzzer
Long press and hold the ¡®>¡¯ button to turn off the buzzer,again to turn on.
Display mode switch
After HUD is turned on,short press the ¡®<¡¯ key to switch the modes.(concise/racing/standard mode)
Please note
It is recommended to unplug the device if your car doesn¡¯t been used for more than one week.
OBD2 FAQ:
1.No function is displayed,no power
Check whether the OBD cable is tight connection, pull down repeatedly to confirm, please try it on another car if still not workable, analysis if it is a cause from OBD diagnostic interface,if yes,please repair it and connect the device again.
2.Only the car voltage displays and be autom |
| Company: |
ShenZhen HuaXing Auto Parts Co.,Ltd
|
| Contact: |
Mr. Andy He |
| Address: |
C3-1008 MinKang Garden MinZhi Street LongHua ShenZhen 518131 CN |
| Postcode: |
518131 |
| Tel: |
86-755-46856856 |
| Fax: |
86-755-46856864 |
| E-mail: |
|
|
|
|
Home
